Brother DCP-J315W Quick Setup Manual page 11

For Wireless Network Users
12
Confirm your network environment (Infrastructure Mode)
The following instructions will offer two methods for installing your Brother machine in a wireless network
environment.
a
If your wireless access point/router does not support Wi-Fi Protected Setup (WPS) or AOSS™, write
down the wireless network settings of your wireless access point/router in the area below.
IMPORTANT
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Item
Network Name: (SSID/ESSID)
Password (Network Key)
* The Password may also be described as the Network Key, Security Key or Encryption Key.
Note
If you do not know this information (Network Name (SSID/ESSID) and Password (Network Key)),
you cannot continue the wireless setup.
How can I find this information (Network Name (SSID/ESSID) and Password (Network Key))
1) You should see the documentation provided with your wireless access point/router.
2) The initial network name could be the manufacturer's name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
Now go to
b
If your wireless access point/router supports automatic wireless (one-push) setup (Wi-Fi Protected
Setup or AOSS™), you can find instructions in the Network User's Guide on the documentation
CD-ROM. To set up your machine in any other wireless environment (Ad-hoc mode) you can find
instructions in the Network User's Guide on the documentation CD-ROM.
Record the current wireless network settings
page 12
11