Check The Print Quality; Set The Date And Time - Brother DCP-J315W Quick Setup Manual

f
Take care to match the colour of the lever with
the cartridge colour.
g
Install each ink cartridge in the direction of the
arrow on the label.
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
7

Check the print quality

a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press
to finish the quality check and go to step 8.
If you can see missing short lines, press
(No) and follow the steps on the LCD.
8
Set the LCD contrast
(if needed)
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
Press OK.
e
Press d or c to choose the contrast level.
Press OK.
f
Press Stop/Exit.
4
9
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Date&Time.
Press OK.
d
To enter the last two digits of the year, press a,
b, d or c to select a number and press OK. To
save the year, press a, b, d or c to select
and press OK.
e
Repeat for month/day/time in 24-hour format.
f
Press Stop/Exit.
(Yes)

Set the date and time

OK
OK