Beep On Bel Character; Trigger Click; Good Read And Error Indicators; Beeper - Good Read - Honeywell Xenon 1900 User Manual

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host.
If you scan the Beep on BEL On bar code below, the scanner will beep every
time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off

Trigger Click

To hear an audible click every time the scanner trigger is pressed, scan the
Trigger Click On bar code below. Scan the Trigger Click Off code if you don't
wish to hear the click. (This feature has no effect on serial or automatic trigger-
ing.) Default = Trigger Click Off.
*Trigger Click Off

Good Read and Error Indicators

Beeper – Good Read
The beeper may be programmed On or Off in response to a good read.
Turning this option off only turns off the beeper response to a good read
indication. All error and menu beeps are still audible. Default = Beeper -
Good Read On.
Beeper - Good Read Off
4 - 2
Beep on BEL On
Trigger Click On
* Beeper - Good Read On