Usb Hid; Usb Serial; Cts/Rts Emulation; Ack/Nak Mode - Honeywell Xenon 1910 User Manual

USB HID

Scan the following code to program the scanner for USB HID bar code scanners.

USB Serial

Scan the following code to program the scanner to emulate a regular RS232-based COM Port. If you are using a Microsoft®
Windows® PC, you will need to download a driver from the Honeywell website (www.honeywellaidc.com). The driver will use
the next available COM Port number. Apple® Macintosh computers recognize the scanner as a USB CDC class device and
automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.

CTS/RTS Emulation

CTS/RTS Emulation On

ACK/NAK Mode

ACK/NAK Mode On
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to communicate with Remote MasterMind Scanner Man-
agement Software (ReM). Scan the ReM On bar code to communicate with ReM. To disable this capability, scan ReM Off.
ReM Off
2 - 4
USB HID Bar Code Scanner
USB Serial
* CTS/RTS Emulation Off
* ACK/NAK Mode Off