Streaming Presentation™ Mode; Streaming Presentation In-Stand Programming - Honeywell Xenon 1900 User Manual

Streaming Presentation ™ Mode
When in Streaming Presentation mode, the scanner's aimer goes out after a
short time, but the scan illumination remains on all the time to continuously
search for bar codes. Two modes are available, Normal and Enhanced. Nor-
mal mode offers good scan speed and the longest working ranges (depth of
field). Enhanced mode will give you the highest possible scan speed but slightly
less range than Normal mode. Enhanced mode is best used when you require
a very fast scan speed and don't require a long working range.
Streaming Presentation Mode
- Normal
When using Preferred Symbology
centered on the aiming pattern to be read in Streaming Presentation Mode.
Note: If you are using a cordless charge base, it must have an external power
supply plugged into the aux port for Streaming Presentation to work
properly.

Streaming Presentation In-Stand Programming

This option is available when using
may program a specific Streaming Presentation Mode for in-stand scan-
ning, and a Manual Trigger mode for out-of-stand scanning. To do this, you
must first scan the preferred Streaming Presentation mode (Normal,
Enhanced, or Mobile Phone), then scan the Manual Trigger mode (Normal,
Enhanced, or Mobile Phone) you want to use.
Streaming Presentation Mode
(page 4-21), a lower priority symbol must be
In-Stand Sensor
- Enhanced
Mode, page 4-14. You
4 - 15