Paper Jam Detector - Oki C9600 Service Manual

2.8

Paper Jam Detector

The C9800/C9600 detects paper jam during printing after turning on the power source. If there is any
paper jam detected, the printing process is immediately canceled. In this case, open the cover, remove
the paper that is jammed, and close the cover to resume printing.
Error Code Displayed on LCD
400,401 Paper Size Error
372 Mis-feeding in Double-Side
Print Conveyance Assy
390 MT mis-feed.
391 Cassette 1, 2, 3, 4 or 5 mid-
392 feed.
393
394
395
370 Paper jam when printing on
the other side with Double-
Side Print.
383 Paper jam at the entrance
of the Double-Side Printer
Unit.
371 Paper jam at the input of the
Double-Side Printer Unit.
382 Paper discharge jam.
381 Paper conveyance jam
380 Paper output jam.
490 MT out of paper.
491 Cassette 1, 2, 3, 4 or 5 out
492 of paper
493
494
495
382 Discharge
383
Dup-in sensor
370
Double-side print rear sense
42930511TH Rev. 2
Error
Paper
381
conveyor
Exit sensor
371 Double-side print input
Double-side
print entry
Dup F sensor
Dup R senser
After the Entrance Cassette Sensor turns ON, it
won t turn OFF for a certain period of time. It detects
several different types of paper sizes.
Failure to feed paper from the Double-Side Print
Conveyance Assy.
Paper feed from the MT failed. (If, after Hopping, the
Entrance MT Sensor does not turn ON within a
certain period of time)
Paper supply failed from Cassette 1, 2, 3, 4 and 5.
(If, after Hopping, the Entrance Cassette Sensor
does not turn ON within a certain period of time)
The double-side printer rear sensor does not turn
ON when printing the other side with the double-side
printer unit.
The double-side printer IN sensor does not turn ON
when supplying paper to the double-side printer unit.
The double-side printer front sensor does not turn
ON while the double-side printer unit is operating.
The paper discharge sensor senses the tip of the
paper but does not sense the end of the paper after
that within a certain period of time. The paper
discharge sensor turns ON, but does not turn OFF
after that.
The paper is conveyed on the belt, however, the
paper discharge sensor does not turn ON.
After hopping is completed, the paper does not
reach the entrance belt sensor or the MT sensor.
If printing is started when the MT is out of paper.
Cassette 1, 2, 3, 4 or 5 out of paper
IN2 sensor
MTP PE sensor
Paper feed
380
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Oki Data CONFIDENTIAL
State
Multipurpose tray part
(MT)
Mis-feed in MT
390
IN1 sensor
372 Mis-feed in double-sided printing
Mis-feed in a cassette 1
391
Mis-feed in a cassette 2
392
393 Mis-feed in a cassette 3
394 Mis-feed in a cassette 4
395
Mis-feed in a cassette 5
44 /