4.3.15 HV-Assy
(1)
Open the Cover Assy-Top, then remove the Belt-Assy.
(2)
Remove the Cover-Middle. (Refer to Section 4.3.14)
(2)
Unscrew screw 1, then remove Cover-HV-Assy 2.
(3)
Remove the 2 connectors and unscrew the 2 screws 3, then remove HV-Assy 4.
(4)
Remove the 2 hinges, then remove Bracket-HV-Assy 5.
5
For ODA version
* Be careful to change the high-voltage power supply of 600dpi device due to different high-
voltage power supply based on a destibation.
Standard device : 43130501
Specified destination (for AB) : 42426501
42930511TH Rev. 2
2
1
4
Oki Data CONFIDENTIAL
1
3
122 /