Oki C9600 Service Manual page 39

(6) Fuser Unit and Paper Output
1. The fuser unit and discharge roller is driven by a single DC motor. The heater roller
turns when the fuser motor turns in the direction of the arrow (a). This roller fuses
the toner image on the paper with heat and pressure.
2. At the same time, the four discharge rollers are activated to discharge paper.
3. The discharge path to the face-up or face-down stacker is automatically switched by
the paper separator solenoid.
Face-up stacker
42930511TH Rev. 2
Discharge roller
Paper separator
Figure 2-10
Face-down stacker
Fuser unit
Heat roller
a
Fuser motor
Oki Data CONFIDENTIAL
39 /