Cisco 7960G Administration Manual page 81

Chapter 4 Configuring Network Settings on the Cisco IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
IP Address Internet Protocol (IP) address of the
phone.
If you assign an IP address with this
option, you must also assign a subnet
mask and default router. See the Subnet
Mask and Default Router options in
this table.
Subnet Mask Subnet mask used by the phone.
TFTP Server 1 Primary Trivial File Transfer Protocol
(TFTP) server used by the phone. By
default this server is CiscoCM1. If you
are not using DHCP in your network
and you want to change this default
server, you must use the TFTP Server 1
option.
If you set the Alternate TFTP option to
yes, you must enter a non-zero value
for the TFTP Server 1 option.
Default Router 1 Default router used by the phone
(Default Router 1) and optional backup
Default Router 2
routers (Default Router 2–5.)
Default Router 3
Default Router 4
Default Router 5
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
OL-4825-01
Network Configuration Menu Options
To Change
Set the DHCP Enabled option to No.
1.
Scroll to the IP Address option, press
2.
the Edit softkey, and then enter a new
IP Address.
Press the Validat. softkey and then
3.
press the Save softkey.
Set the DHCP Enabled option to No.
1.
Scroll to the Subnet Mask option,
2.
press the Edit softkey, and then enter
a new subnet mask.
Press the Validat. softkey and then
3.
press the Save softkey.
Set the Alternate TFTP option to Yes.
1.
2. Scroll to the TFTP Server 1 option,
press the Edit softkey, and then enter
a new TFTP server IP address.
Press the Validat. softkey, and then
3.
press the Save softkey.
1. Set the DHCP Enabled option to No.
Scroll to the appropriate Default
2.
Router option, press the Edit softkey,
and then enter a new router IP
address.
Press the Validat. softkey.
3.
Repeat Steps 3 and 4 as needed to
4.
assign backup routers.
Press the Save softkey.
5.
4-7