Cisco 7960G Administration Manual page 69

Chapter 3 Setting Up the Cisco IP Phone
Procedure
Push in the footstand adjustment knob.
Step 1
Step 2 Adjust the footstand so it is flat against the back of the phone.
Insert two screws into a wall stud, matching them to the two screw holes on the
Step 3
back of the footstand.
The keyholes fit standard phone jack mounts.
Hang the phone on the wall.
Step 4
Figure 3-2
1
2
3
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
OL-4825-01
Parts Used in Wall Mounting the Cisco IP Phone
Footstand adjustment knob—Raises and lowers adjustment plate
Wall mounting screw holes
Adjustment plate—Raises and lowers phone vertically
Adjusting Placement of the Cisco IP Phone
3-11