Cisco 7960G Administration Manual page 110

Status Menu
Table 6-1 Status Messages on the Cisco IP Phone Models 7960G and 7940G (continued)
Message
No default router
No DNS server IP
Programming Error
XmlDefault.cnf.xml,
or .cnf.xml
corresponding to the
phone device name
TFTP access error
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
6-8
Chapter 6 Viewing Model Information, Status, and Statistics, on the Cisco IP Phone
Description
DHCP or static configuration
did not specify a default
router.
A name was specified but
DHCP or static IP
configuration did not specify a
DNS server address.
The phone failed during
programming.
Name of the configuration file. None. This is an informational message
TFTP server is pointing to a
directory that does not exist.
Possible Explanation and Action
If the phone has a static IP address, verify
•
that the default router has been
configured. See the
Configuration Menu Options" section on
page 4-6 section for details.
If you are using DHCP, the DHCP server
•
has not provided a default router. Check
the DHCP server configuration.
If the phone has a static IP address, verify
•
that the DNS server has been configured.
See the "Network Configuration Menu
Options" section on page 4-6
details.
If you are using DHCP, the DHCP server
•
has not provided a DNS server. Check the
DHCP server configuration.
Attempt to resolve this error by power cycling
the phone. If the problem persists, contact
Cisco technical support for additional
assistance.
indicating the name of the configuration file
for the phone.
If you are using DHCP, verify that the
•
DHCP server is pointing to the correct
TFTP server.
If you are using static IP addresses, check
•
configuration of TFTP server. See the
"Network Configuration Menu Options"
section on page 4-6
assigning a TFTP server.
"Network
section for
for details on
OL-4825-01