Port 1 (Network), Port 2 (Access), And Port 3 (Phone) Statistics - Cisco 7960G Administration Manual

For cisco callmanager 4.0
Hide thumbs Also See for 7960G:
Table of Contents

Advertisement

Network Statistics

Port 1 (Network), Port 2 (Access), and Port 3 (Phone) Statistics

Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
7-12
Table 7-3
Ethernet Area Items (continued)
Item
Rx Shorts
Rx Longs
The following area on a phone's web page provide information about network
traffic to and from ports on the phone:
Port 1 (Network)—Provides information about the 10/100 SW port
Port 2 (Access)—Provides information about the 10/100 PC port
Port 3 (Phone)—Provides information about network traffic to and from the
phone
To display any of these areas, access the web page for the phone as described in
the
"Accessing the Web Page for a Phone" section on page
Port 1 (Network), the Port 2 (Access), or the Port 3 (Phone) hyperlink.
Table 7-4
describes the items in the Port 1 (Network), Port 2 (Access), and Port 3
(Phone) areas.
Table 7-4
Port Statistics Area Items
Item
Carrier Events
Rx totalPkt
Rx crcErr
Rx alignErr
Rx multicast
Rx broadcast
Chapter 7
Description
Total number of good packets received that are less
than 64 bytes size
Total number of good packets received that are
greater than 1522 bytes in size
Description
Indicates loss of carrier on the port
Total number of packets received by the phone
Total number of packets received with CRC failed
Total number of packets received between 64 and 1522
bytes in length that have a bad FCS
Total number of multicast packets received by the
phone
Total number of broadcast packets received by the
phone
Monitoring the Cisco IP Phone Remotely
7-2, and then click the
OL-4825-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7940g

Table of Contents