Adding Phones To The Cisco Callmanager Database - Cisco 7960G Administration Manual

Adding Phones to the Cisco CallManager Database

Adding Phones to the Cisco CallManager Database

Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
2-10
To use this redundancy feature:
Set the inline power mode to auto on the Cisco Catalyst switch.
1.
Connect the unpowered Cisco IP Phone to the network.
2.
Connect the external power supply to the phone after the phone powers up.
3.
Related Topics
Understanding Interactions with Other Cisco IP Telephony Products,
•
page 2-2
Providing Power to the Cisco IP Phone, page 2-8
•
Installing the Cisco IP Phone, page 3-6
•
Before installing the Cisco IP phone, you must choose a method for adding
phones to the Cisco CallManager database. The following sections describe these
methods:
Adding Phones with Auto-Registration, page 2-11
•
Adding Phones with Auto-Registration and TAPS, page 2-12
•
Adding Phones with Cisco CallManager Administration, page 2-13
•
Adding Phones with BAT, page 2-14
•
Table 2-2 provides an overview of these methods for adding phones to the
Cisco CallManager database.
Chapter 2 Preparing to Install the Cisco IP Phone on Your Network
OL-4825-01