Field Service Ver. 1.0 Sep. 2008
11.3 PAPER SETUP
11.3.1
TRAY1 PAPER
Function
• Sets the type and size of the paper loaded in tray1.
• When the type and size of the paper loaded in tray1 have been changed
Use
• The default setting varies according to the voltage of the printer.
• The default setting is PLAIN PAPER.
"PLAIN PAPER" THICK PAPER
LABELS
ENVELOPE
• Default setting of paper size depend on the marketing area setting.
USA and Canada: "LETTER", Other country: "A4"
<PLAIN PAPER, LETTERHEAD>
A4, A5, B5, LEGAL, LETTER, G LETTER, STATEMENT, EXECUTIVE, FOLIO, G LEGAL,
Setting/
OFICIO, CUSTOM
procedure
NOTE
• [OFICIO] only display when PTT=MEXICO.
• If [CUSTOM] is selected as the paper size, specify settings for LENGTH (148 to
356 mm) and WIDTH (92 to 216 mm) separately.
<ENVELOPE>
"COM10", C6, DL, MONARCH, CHOU #3, CUSTOM
<POSTCARD>
"J-POSTCARD 100x148", D-POSTCARD 148x200, CUSTOM
11.3.2
TRAY2 PAPER
• Sets the size of the paper loaded in tray2.
Function
• This function becomes available only when the optional tray2 is mounted in the
machine.
Use
• To set the size of paper loaded in tray2 according to that actually loaded.
• PLAIN PAPER only
• Default setting of paper size depend on the marketing area setting.
USA and Canada: "LETTER", Other country: "A4"
Setting/
"A4"
procedure
G LETTER
NOTE
• If [CUSTOM] is selected as the paper size, specify settings for LENGTH (148 to
297 mm) and WIDTH (92 to 216 mm) separately.
THICK PAPER2 TRANSPARENCY
LETTERHEAD
GLOSSY
POSTCARD
A5
B5
STATEMENT
EXECUTIVE
11. UTILITY mode
GLOSSY2
"LETTER"
CUSTOM
135