Setting Up The Paper Sources; Selecting The "Paper Source Setup" Menu - Konica Minolta Di1610fp User Manual

7.3 Setting Up the Paper Sources

7.3 Setting Up the Paper Sources
From the "PAPER SOURCE SETUP" menu, the various settings for each paper
tray can be specified.
No. Name
1 TRAY1 PAPER
2 TRAY SETTING

Selecting the "PAPER SOURCE SETUP" menu

1
Press the [Utility] key twice.
"PAPER SOURCE SETUP"
appears.
2
From the 10-Key Pad, press the key ([1] or [2]) for the PAPER SOURCE SETUP
function that you wish to set.
❍
The PAPER SOURCE SETUP functions are as follows:
1 TRAY1 PAPER
2 TRAY SETTING
Tip
To quit setting up the paper sources, press the [No] key. "STOP SETTING?"
appears. Press the [Yes] key to quit changing the settings.
Di1610fp
Description
The type and size of paper loaded in Tray1 can be specified.
• The manufacturer's default settings are "PLAIN" and "Letter L".
Whether or not auto tray switching is enabled for each paper tray can
be specified. (p. 3-18)
• The factory default setting is "CONTINUOUS".
7
7-15