Auto Redial; Supplies Replace - Konica Minolta bizhub c20 Service Manual

11. UTILITY mode
F. USER NAME
Function
• The User Name is used for the indication of destination station at the time of the com-
munication between same models.
Use
Setting/
• Maximum 32 digits character can be inputted.
procedure
11.4.10

AUTO REDIAL

A. NUMBER OF REDIAL
Function
• To specify the number of times a redial is attempted if there is no answer, for example,
when the line is busy.
Use
Setting/
• 1 - 10 (Default: Depends on [PTT SETTING])
procedure
B. INTERVAL
Function
• To specify the interval between redial attempts.
Use
Setting/
• 1 - 99 (Default: Depends on [PTT SETTING])
procedure
11.4.11

SUPPLIES REPLACE

A. TRANSFER BELT
Function • Resets the transfer belt counter.
Use • To use when the transfer belt has been replaced.
1. Select [SUPPLIES REPLACE] → [TRANSFER BELT].
Setting
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.
B. FUSER UNIT
Function • Resets the fuser unit counter.
Use • To use when the fuser unit has been replaced.
1. Select [SUPPLIES REPLACE] → [FUSER UNIT].
Setting
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.
C. TRANSFER ROLLER
Function • Resets the transfer roller counter.
Use • To use when the transfer roller has been replaced.
1. Select [SUPPLIES REPLACE] → [TRANSFER ROLLER].
Setting
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.
150
Field Service Ver. 1.0 Sep. 2008