Answering system
Answering system settings
Remote access code
A 2-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can change the
code to any number from 00 to 99.
To change the remote access code:
Using a handset or the telephone base:
1.
Press
MENU
2.
Use
CID or DIR on the handset, or
the telephone base
SELECT
press
3.
Use
CID or DIR on the handset, or
the telephone base
press
SELECT
4.
Press
CID or DIR on the handset, or
the telephone base
press
SELECT
5.
Use the dialing keys (0-9) to enter a 2-digit number
from 00-99.
•
Press
MUTE
telephone base to erase a digit.
•
Press and hold
DELETE/X on the telephone base to erase all digits.
•
Press
CID or DIR on the handset or
DIR on the telephone base
Press
SET
to save. You hear a confirmation tone.
in idle mode to enter the main menu.
to scroll to Answering sys, then
.
to scroll to Ans sys setup, then
.
to scroll to Remote code, then
.
/DELETE on handset, or DELETE/X on the
/DELETE on the handset or
MUTE
CID
or DIR on
CID
or DIR on
CID
or DIR on
CID
to move the cursor to the right or left.
107
ANS SYS SETUP
Cal l screening
# of rings
Remote code
BACK
REMOTE CODE
BACK
ANS SYS SETUP
Cal l screening
# of rings
Remote code
BACK
REMOTE CODE
BACK
or
SELECT
19
SET
SELECT
19
SET