Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID log or redial list while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account numbers or access codes) from the directory, caller ID log or
redial list.
To access a number in the directory while on a call:
Using a handset:
1.
Press
OPTION
2.
Press CID or DIR to highlight Directory, then press
Press CID or DIR to highlight the desired directory, then press
3.
4.
Press CID or DIR to highlight to the desired entry or perform an
alphabetical search (page 83).
5.
Press
DIAL
to dial the displayed number.
Using the telephone base:
OPTION
1.
Press
2.
Press CID or DIR to highlight Directory, then press
Press CID or DIR to highlight the desired directory, then press
3.
4.
Press CID or DIR to highlight to the desired entry or perform an
alphabetical search (page 83).
5.
Press
DIAL
to dial the displayed number.
Transfer a call
While on an outside call, you can transfer the call from one device to another.
1.
Press OPTION, then press
•
Your handset or the telephone base displays TRANSFER TO: and a list
of registered devices.
–
Press
CID or DIR
telephone base to highlight the destination device and then
press SELECT.
Your handset or telephone base displays Transferring call to HANDSET X,
Transferring call to BASE 0 or Transferring call to all... when you choose
Group. The destination device(s) rings.
2.
Your handset or telephone base displays Call transferred when the other
device picks up the call. You hear a confirmation tone.
NOTE: If the destination device does not answer within 30 seconds, the caller device
displays No response to transfer and rings. If the caller device does not answer the call on
hold within 30 seconds, the call will end automatically.
.
.
SELECT
on the handset or
to highlight Transfer.
CID or DIR
55
SELECT
.
REVIEW
SELECT
.
REVIEW
on the
.
.