Telephone operation
Redial
The telephone base and each handset store the last 10 dialed numbers (up
to 30 digits each) in the redial list. The redial entries of each handset and the
telephone base are independent.
Review the redial list
To review the redial list of a handset:
1.
Press REDIAL/
Press CID , DIR or REDIAL/
2.
browse the list. The handset beeps twice at the end
of the list.
Press
OFF/
CANCEL
To review the redial list of the telephone base:
1.
Press REDIAL/
Press CID, DIR or REDIAL/
2.
telephone base beeps twice at the end of the list.
Press CANCEL to exit.
Dial a redial entry
To dial a redial entry on a handset:
1.
Press
HOME/
CELLULAR to use the cell line. Then, press REDIAL/
redial list.
Press CID , DIR or REDIAL/
2.
number displays. The handset beeps twice at the end of the list.
3.
Press
DIAL
to dial the number displayed.
You can also select a redial entry before dialing.
1.
Press REDIAL/
2.
Press CID , DIR or REDIAL/
number displays. The handset beeps twice at the end of the list.
HOME/
3.
Press
CELLULAR
in idle mode.
PAUSE
to exit.
in idle mode.
PAUSE
, or
/SPEAKER to use the home line, or
FLASH
in idle mode.
PAUSE
/SPEAKER to use the home line,
, or
FLASH
to use the cell
line.
repeatedly to
PAUSE
repeatedly to browse the list. The
PAUSE
repeatedly to browse until the desired
PAUSE
repeatedly to browse until the desired
PAUSE
57
to enter the
PAUSE
or