Www Overview - ZyXEL Communications ZyWall USG 300 User Manual

Unified security gateway
Hide thumbs Also See for ZyWall USG 300:
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 239 Configuration > System > DNS > Service Control Rule Add
LABEL
Create new
Object
Address
Object
Zone
Action
OK
Cancel

50.6 WWW Overview

The following figure shows secure and insecure management of the ZyWALL
coming in from the WAN. HTTPS and SSH access are secure. HTTP, Telnet, and
dial-in management access are not secure.
Figure 542 Secure and Insecure Service Access From the WAN
• See
Section 6.7.1 on page 111
Note: To allow the ZyWALL to be accessed from a specified computer using a service,
make sure you do not have a service control rule or to-ZyWALL firewall rule to
block that traffic.
ZyWALL USG 300 User's Guide
DESCRIPTION
Use this to configure any new settings objects that you need to use in
this screen.
Select ALL to allow or deny any computer to send DNS queries to the
ZyWALL.
Select a predefined address object to just allow or deny the computer
with the IP address that you specified to send DNS queries to the
ZyWALL.
Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the ZyWALL is allowed
or denied.
Select Accept to have the ZyWALL allow the DNS queries from the
specified computer.
Select Deny to have the ZyWALL reject the DNS queries from the
specified computer.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
for related information on these screens.
Chapter 50 System
823

Advertisement

Table of Contents
loading

Table of Contents