ZyXEL Communications ZyWall USG 300 User Manual page 848

Unified security gateway

Hide thumbs Also See for ZyWall USG 300:

Table of Contents

Chapter 50 System

be used to access the ZyWALL. You can also specify from which IP addresses the

access can come.

Figure 571 Configuration > System > FTP

The following table describes the labels in this screen.

Table 245 Configuration > System > FTP

TLS required

Select the check box to allow or disallow the computer with the IP

address that matches the IP address(es) in the Service Control table to

access the ZyWALL using this service.

Select the check box to use FTP over TLS (Transport Layer Security) to

encrypt communication.

This implements TLS as a security mechanism to secure FTP clients and/

You may change the server port number for a service if needed, however

you must use the same port number in order to use that service for

remote management.

Select the certificate whose corresponding private key is to be used to

identify the ZyWALL for FTP connections. You must have certificates

already configured in the My Certificates screen (Click My Certificates

Chapter 46 on page 765

This specifies from which computers you can access which ZyWALL

Click this to create a new entry. Select an entry and click Add to create a

new entry after the selected entry. Refer to

details on the screen that opens.

Double-click an entry or select it and click Edit to be able to modify the

entry's settings.

To remove an entry, select it and click Remove. The ZyWALL confirms

you want to remove it before doing so. Note that subsequent entries

move up by one when you take this action.

for details).

Table 241 on page 829

ZyWALL USG 300 User's Guide

Troubleshooting