Monitor; Chapter 10 Monitor; Overview; What You Can Do In This Chapter - ZyXEL Communications ZyWall USG 300 User Manual

C
H A P T E R

10.1 Overview

Use the Monitor screens to check status and statistics information.

10.1.1 What You Can Do in this Chapter

Use the Monitor screens for the following.
• Use the System Status > Port Statistics screen (see
236) to look at packet statistics for each physical port.
• Use the System Status > Port Statistics Graph screen (see
page 236) to look at a line graph of packet statistics for each physical port.
• Use the System Status > Interface Status screen
239) to see all of the ZyWALL's interfaces and their packet statistics.
• Use the System Status > Traffic Statistics screen (see
243) to start or stop data collection and view statistics.
• Use the System Status > Session Monitor screen (see
246) to view sessions by user or service.
• Use the System Status > DDNS Status screen (see
248) to view the status of the ZyWALL's DDNS domain names.
• The System Status > IP/MAC Binding screen
lists the devices that have received an IP address from ZyWALL interfaces with
IP/MAC binding enabled.
• Use the System Status > Login Users screen
look at a list of the users currently logged into the ZyWALL.
• Use the System Status > WLAN Status screen
view the connection status of the wireless clients connected to (or trying to
connect to) a IEEE 802.11b/g card installed in the ZyWALL.
• Use the System Status > Cellular Status screen
to check your 3G connection status.
• Use the AppPatrol Statistics screen (see
bandwidth usage graph and statistics for each protocol.
• Use the VPN Monitor > IPSec screen
and manage active IPSec SAs.
ZyWALL USG 300 User's Guide

Monitor

Section 10.2 on page
(Section 10.3 on page
Section 10.4 on page
Section 10.5 on page
Section 10.6 on page
(Section 10.7 on page
(Section 10.8 on page
(Section 10.9 on page
(Section 10.10 on page
Section 10.11 on page
(Section 10.12 on page
10
Section 10.2 on
249)
250) to
251) to
252)
254) to see a
258) to display
235