The Zone Screen - ZyXEL Communications ZyWall USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 300:

Table of Contents

17.2 The Zone Screen

The Zone screen provides a summary of all zones. In addition, this screen allows

you to add, edit, and remove zones. To access this screen, click Configuration >

Network > Zone.

Figure 310 Configuration > Network > Zone

The following table describes the labels in this screen.

Table 100 Configuration > Network > Zone

Configuration /

Block Intra-

ZyWALL USG 300 User's Guide

The ZyWALL comes with pre-configured System Default zones that you

cannot delete. You can create your own User Configuration zones

Click this to create a new, user-configured zone.

Double-click an entry or select it and click Edit to open a screen where

you can modify the entry's settings.

To remove a user-configured trunk, select it and click Remove. The

ZyWALL confirms you want to remove it before doing so.

Select an entry and click Object References to open a screen that

shows which settings use the entry. See

This field is a sequential value, and it is not associated with any

This field displays the name of the zone.

This field indicates whether or not the ZyWALL blocks network traffic

between members in the zone.

This field displays the names of the interfaces that belong to each zone.

Chapter 17 Zones

Section 13.3.2 on page 303