Hoover HNF 9167 Instruction Book page 25

40002098Eng.qxd 22/11/2004
Fast Iron (
This option is only available on the Synthetics, Acrylics, Woolmark and Silk
programmes.
Programme
Synthetics
( 50)
Acrylics
( 40)
Woolmark
( )
Silk
( )
Start Delay (
The Programme Set End Time/Start Delay options can be used if you want the
washing to be ready at a later time (but within 24 hours). The way these
buttons function will depend on which Time Mode you have selected in the
Inter@ct menu.
11:35 Page 25
)
Fast Iron function
The programme is
completed by a short
spin, of very low speed.
The machine stops in the
final rinse stage and the
option indicators blink.
The load is held in the
water in the drum, thus
reducing creasing and
enabling easier ironing.
The machine stops in the
final rinse stage and the
option indicators blink.
The load is held in the
water in the drum, thus
reducing creasing and
enabling easier ironing.
The machine stops in the
final rinse stage and the
option indicators blink.
The load is held in the
water in the drum, thus
reducing creasing and
enabling easier ironing.
)
Action required to complete the
cycle
To select a full spin cycle please
turn the dial to the required spin
programme (see Programme
Guide).
Press the - button to continue
with the programme. The
machine will then pump out the
water and the programme will
conclude with a short spin.
Finally, the programme carries
out a brief tumbling action to
loosen the items in the load.
Press the button and the
machine will pump out the
water and complete the cycle
with a short spin.
Press the button and the
machine will pump out the
water to complete the cycle. The
load will not be spun and will
therefore be very wet.
25