Turning The Machine On - Hoover HNF 9167 Instruction Book

40002098Eng.qxd 22/11/2004

Turning the machine on

Turn the machine on by selecting a programme using the programme selector.
The display will then indicate the name of the programme, the spin speed and
temperature of the wash and this display will remain until you press the
button or return the programme selector to the OFF position.
Start/Pause (
Start
After selecting the programme and the required options (see the Wash
Options section of this manual), press the
cycle. The display will indicate that the door is locked and the machine will
begin to sense the wash load and ask you to wait.
After the appropriate parameters have been programmed by the machine the
display will indicate the approximate time until the end of the programme.
This calculation is based on a full load and will be adjusted to suit the size and
composition of the load as the machine progresses through the wash cycle.
11:34 Page 21
COTTON WHITE
11
HEAVY SOIL
)
PLEASE WAIT
11
SET PARAMETERS
END:
11
WASHING
90
button once to start the wash
90
H M
2 45
90
21