Connection Of Other Accessories; (Commercially Available Parts) - Kenwood HM-333 Instruction Manual

8

Connection of Other Accessories

CAUTION
Note on Connection
Connect the components as shown in the dia-
gram. Only plug the power cord into a power
outlet once connections are completed.
* DIGITAL OUT jack (OPTICAL)
The DIGITAL OUT jack (OPTICAL) outputs the
CD signal.
The CD signal can be recorded in digital format
by connecting a recorder to the DIGITAL IN jack
(OPTICAL).
MD recorder or DAT etc.
Digital input
Optical fiber cable
Audio cord
Audio output
VCR, Analog turntable with built-in
RIAA equalizer (optional P-110), etc.
÷ In case an associated system component is connected, also read the instruction manual of the component.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be
Notes Notes
produced or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.

(Commercially Available Parts)

FM outdoor antenna
Lead the 75 coaxial cable connected to the FM out-
door antenna into the room and connect it to the
FM 75
tenna after an outdoor antenna has been installed.
*
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
OPTICAL
ANTENNA
cap
AM
AUX
INPUT
GND
L
FM
75
R
terminal. Please remove the indoor an-
ANTENNA
Antenna adaptor
(Commercially
Available Parts)
AM
GND
FM
75
+
L
-
FRONT
SPEAKERS
(6-16 W)
-
R
+
POWER cord
TO WALL AC OUTLET
System connection
FM outdoor antenna