Connection Of Other Accessories (Commercially Available Parts) - Kenwood HM-535 Instruction Manual

Connection of Other Accessories
CAUTION
Note on Connection
Connect the components as show n in the dia-
gram. Only plug the pow er cord into a pow er
outlet once connections are completed.
* DIGITAL OUT jack (OPTICAL)
The DIGITAL OUT jack (OPTICAL) outputs the CD
signal.
The CD signal can be recorded in digital format by
connecting a recorder to the DIGITAL IN jack
(OPTICAL).
VCR, Analog turntable w ith built-in
RIAA equalizer (optional P-110), etc.
Audio output
Audio cord
Optical fiber cable
Digital input
M D recorder or DAT etc.
÷ In case an associated system component is connected, also read the instruction manual of the component.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be
produced or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the pow er cord from the w all AC outlet. If
connection cords are plugged or unplugged w ith the pow er cord left plugged in, malfunction or damage may result.
8 EN
(Commercially Available Parts)
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM out-
door antenna into the room and connect it to the
FM 75Ω terminal. Please remove the indoor an-
tenna after an outdoor antenna has been installed.
- +
L
R
FRONT
SPEAKERS
(6-16 Ω)
R L
AUX
INPUT
DIGITAL
OUT
OPTICAL
*
DIGITAL
OUT
OPTICAL
cap
Antenna adaptor
AM
GND
(Commercially
Available Parts)
FM
75 Ω
ANTENNA
AM
GND
FM
75 Ω
ANTENNA
POW ER cord
TO WALL AC OUTLET
System connection
FM outdoor antenna