Connection Of Other Accessories; (Commercially Available Parts) - Kenwood R-K701 Instruction Manual

System connections

Connection of other accessories

CAUTION
Connect the components as shown in the diagram.
Only plug the power cord into an AC wall outlet once
connections are completed.
÷ Moving coil (MC) cartridge
record player cannot be used
directly from the unit. It can
only be used when equalizer
amplifier for MC cartridge is
connected.
÷ For record players with equal-
izer amplifier, connect it to the
AUX IN terminal.
Earth
cord
Audio OUT
Record Player
with MM cartridge
Audio OUT
VCR
÷ In case an associated system component is connected, also read the instruction manual of the component.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced
or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.
÷ The earth terminal with the H symbol is used for noise reduction of record player. It is not for safety earth.
8
EN

(Commercially available parts)

AM
ANTENNA
AM
GND
ROOM EQ
MIC IN
AC POWER cord
SUB WOOFER
PRE OUT
To AC wall outlet
Powered
Subwoofer
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM
outdoor antenna into the room and connect it to the
FM 75Ω terminal. Please remove the indoor antenna
after an outdoor antenna has been installed.
Antenna adaptor
(Commercially
available parts)
ANTENNA
FM
GND 75Ω
TAPE
PHONO AUX
IN IN
REC OUT PLAY IN
FM
L
75Ω
R
+
L
R
SUB WOOFER
PRE OUT
–
SPEAKERS(6–16Ω)
FM outdoor antenna
Audio OUT
Audio IN
Cassette Tape Deck