Setting An Everyday Timer Program (Prog. Timer) - Kenwood HM-333 Instruction Manual

44
Setting an everyday timer program
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be
set and selected to be activated or not as required.
Adjust the clock before setting the timer ‚
Connect the related equipment under reference to "System connection" 6~8
1
Make preparations for the play (recording).
To listen to CD
Insert a disc.
(Program playback is not possible.)
To listen to radio
The station should be preset
£
prior.
÷ Two timer settings can be reserved independently in two programs PROG.1 and PROG.2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2
do not overlap.
2
Select the timer number.
1
Select "TIMER SET ?".
menu
\
\
volume / multi control
(Press the set/demo key while the "?" mark is
blinking.)
2
Select "PROG. 1 SET ?" or
"PROG. 2 SET ?".
volume / multi control
3
Set it.
(Press during display of the program contents.)
Set a tape into.
Playing the auxiliary input source
Make timer setting of the compo-
nent connected to the AUX input
jacks.
set / demo
\
\
set / demo
(PROG. TIMER)
To listen to tape
Turning the knob switches the display contents.
"T A P E R VS. ? "
"REC OPTIONS"
"AUTO PRESET" or "AUTO MEMORY"
(Only when the TUNER input is selected)
"A U X I N P U T ? "
(Only when the AUX input is selected)
"T I M E R S E T ? "
"A . P . S . S E T ? "
Turning the knob switches the display contents.
1 "O. T. T. SET
2 "PROG. 1 SET ?"
3 "PROG. 2 SET ?"
P R O G . 1 S E T ?
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the se-
lected timer, the setting will be overwritten by the new
setting.
Timer operation
For recording
Make preparations for record-
ing. •
?"
Continued on next page