Playback Of Tape - Kenwood HM-333 Instruction Manual

Playback of tape

20
If you load a tape in the cassette deck in advance while the power is off. Pressing the TAPE 2 3 key turns
power on automatically and starts the tape playback.
Selection of TAPE equalizer (TAPE EQ.)
To stop playback
To wind tape
at high speed
0
push open
1 1
TAPE
2
Start playback
To wind tape at high speed
1. Load a cassette tape.
1 Press the area marked 0 push open to open the cassette
holder.
2 Insert a tape.
3 Press the area marked 0 push open to close the cassette
holder.
Do not use a cassette with more than 90-minute recording time, for the
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting of tape.
÷ The tape deck of the unit can play Normal (Type ), High (Type
Metal (Type
÷ Remove tape slack before loading.
2. Start playback.
Press the TAPE 2 3 key of the desired direction.
3
Reverse mode indication
2 2
Transport direction indicators
Transport direction indicators:
Indicates the tape transport direction during playback or recording by lighting
of 2 or 3. This direction is the direction stored in memory when the tape was
last stopped.
Start playback
2 2
1 1
Selection of TAPE equalizer (TAPE EQ.)
) tapes.
T A P E P L A Y
Tape counter
Playback of tape
To stop playback
Selection of reverse
mode
) and
Displayed when the deck
is loaded with a tape.