Kenwood HM-333 Instruction Manual page 15

Listening through headphones
Insert the headphone plug into the headphone jack.
÷ Headphones with a stereo mini plug can be con-
nected.
÷ The sounds from all speakers are cut off.
Muting the sound temporarily
Remote control unit only
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is changed.
Bass and treble compensation
Each press switches the modes as follows.
1 "EX.BASS" lights.
The lowest and highest frequencies are
enhanced regardless of the current volume
level.
2 "LOUD" (Loudness) lights.
The lowest and highest frequencies are
enhanced according to the current volume
level. (Effective during low-volume listen-
ing.)
3 Both indicators off.
Cancelled.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
MUTE
SOUND
Tone adjustment
Remote control unit only
The lowest and highest frequency bands can be
adjusted independently.
1
Select the frequency band.
Each press switches the operation.
1 "BASS" (low frequency) adjust-
ment
B A S S
2 "TREBLE" (high frequency) adjust-
ment
T R E B L E
3 Normal mode
(Go to step 2 within 8 seconds.)
2
Adjust.
(To adjust the other frequency band, repeat steps
1 and 2 for it.)
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between -8 and +8.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
Basic use method
TONE
+ 0
+ 0
VOLUME
15