Setting The Aux+ Name Mode; Setting The Aux Mode (V-Link); Setting The Changer Name; (Digital Aux) - Alpine iDA-X200 Quick Reference Manual

iDA-X200 :
• No sound is produced by the system when the power output is set to
OFF.
Demonstration
DEMO ON / DEMO
OFF
(Initial setting)
Front
left
Front
right
Rear
right
Rear
left
Front
left
8
SPEAKER
8
LEFT FRONT
SPEAKER
®
®
Front
RIGHT FRONT
8
8
right
SPEAKER
8
8
RIGHT REAR
Rear
®
®
right
@~
Amplifier
@ ~
~~
Amplifier
@~
@~
Amplifier
~~
iDA-X300 :
J
SPEAKER
®
~®
_ LEFT REAR
Rear
--"'-------::8:::--- 8
left
POWER IC ON : The speakers are driven by the built-in amplifier.
Speakers
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHANGER J NAMEICHANGER2
NAME is displayed, and the setting can be made respectively.
Setting the Changer Name
CHANGER (Initial setting) / PORTABLE
When an optional changer is connected, you can set the displayed mode
name.
Setting the External Digital Input (DIGITAL AUX)
DIGITAL AUX ON / DIGITAL AUX OFF (InItial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-S207) not compatible with
Ai-NET are connected, set DIGITAL AUX to ON to enjoy S.I-channel
surround sound.
You can change the D-AUX Name when DIGITAL AUX is set to ON.
Press
~/ENTER
when DIGITAL AUX is set to ON, and select
D-AUX NAME by turning Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only), then press
~/ENTER.
• Press
<!>
SOURCE, and select the D-AUX mode, and adjust the
volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting ofthe optical digital input switch is completed.
• Depending on the connected audio processor. DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.
Setting the AUX Mode (V-Link)
AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NETIRCA
Interface cable (KCA-121 B) or Versatile Link Tenninal (KCA-41 OC) to
this component.
You can change the AUX NAME display when AUX is set to ON. Press
~/ENTER when AUX is set to ON, and select AUX NAME by
turning the Double Action encoder (iDA-X200 only) or Rotary
encoder (iDA-X300 only) , then press
~/ENTER.
After that, tum the Double Action encoder (iDA-X200 only) or Rotary
encoder (iDA-X300 only) to select the desired AUX name.
If the KCA-41 DC is connected, it is possible to select two AUX names.
• Via KCA-4JOC, up to 2 external devices with RCA output can be
connected. In this case, press
<!>
SOURCE to select AUX mode and
then press BAND to select your desired device.
Setting the AUX+ NAME Mode
AUX (Initial setting) / TV / DVD / PORTABLE / GAME
You can change the AUX+ NAME when AUX+ is ON.
Setting the AUX+ Level (AUX IN GAIN)
LOW (Initial setting) / HI
After setting to ON in "Setting the AUX+ Mode", this setting can
be
carried out.
LOW: Decreases the external input audio level.
HI: Increases the external input audio level.
Connecting to an External Amplifier (POWER IC)
ON (Initial setting) / OFF
When an external amplifier is connected, sound quality can
be
improved
by stopping the power supply of the built-in amplifier.
POWER IC OFF: Use this mode when the front pre-amplifier of the
unit is used to drive an external amplifier
connected to the speakers. In this setting, the
head unit's internal amplifier has no output to
drive speakers.
DISPLAY is selected on the setup main menu in step 2.
Dimmer Control
MANUAL / AUTO (Initial setting)
Set the Dimmer control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.
Scroll Type Setting
TYPE1/ TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
TYPE1: The characters scroll from right to left, a single
character at a time.
TYPE2: Words are built up from left to right, a single character
at a time. When the display is filled, it is cleared and
the remaining words are displayed the same way until
all words of the title have been shown.
24-EN