Setup; Setting; General Setting; Setting The Aux Setup Mode - Alpine CDE-143EBT Owner's Manual

SETUP

Rotary encoder

/ENTER
AUDIO/SETUP
* The illustration is for CDE-143EBT/CDE-143EBTTH.

Setting

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
*1
 GENERAL  DISPLAY  TUNER  iPod 
AUDIO
*2
BLUETOOTH
GENERAL:
AUX SETUP  AUX NAME
DISPLAY:
TEXTSCROLL  SCROLLTYPE
TUNER:
FM SET
iPod:
iPod LIST
*1 Refer to "Audio Setup" on page 14.
*2 Refer to "BLUETOOTH SETUP" on page 21.
*3 Displayed only when AUX SETUP is set to ON.
*4 CDE-143EBT/CDE-143EBTTH only.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF.)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• Press r to return to the previous mode.
*3 *4
 PLAY MODE  DEMO
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

General Setting

GENERAL is selected on the setup main menu in step 2.

Setting the AUX SETUP mode

You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
AUX OFF / AUX ON (Initial setting)
AUX OFF:
When set to OFF, AUX source cannot be selected.
AUX ON:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.

Setting the AUX NAME mode

You can change the AUX NAME display in the SETUP mode.
 Setting item: AUX NAME
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME
Note
• PORTABLE is abbreviated as PMD in the display.
Playing MP3/WMA/AAC Data (PLAY MODE)
(CDE-143EBT/CDE-143EBTTH only)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
 Setting item: PLAY MODE
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.

Demonstration

This unit has a demonstration feature for the display.
 Setting item: DEMO
Setting contents:
DEMO OFF (Initial setting) / DEMO ON
Note
• To quit Demo mode, set to DEMO OFF.
19
-EN