Checking The Sat Radio Ill Number; Storing Channel Presets; Receiving Stored Channels - Alpine iDA-X200 Quick Reference Manual

• The SAT Receiver controls on this unit are operative only when a SAT
Receiver is connected.
1
Press <!> SOURCE to activate the SAT Radio mode.
2
Press BAND to select one of the three SAT Radio
Preset Bands.
Each press changes the band:
XM mode:
XM1
-7
XM2
-7
XM3
-7
XM1
SIRIUS mode:
SR1
-7
SR2
-7
SR3
-7
SR1
3
Press
~
or
~
to select the desired channel.
Holding down
~
or
~
will change channels
continuously.
• When using the optional remote control (RUE-4190, etc.), an SAT
Radio Channel can be directly called up with the numeric keypad of
the remote control.
While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the channel.
If the channel number is input without pressing ENTER,
the channel is automatically received after
5 seconds.
Checking the SAT Radio ID Number
A unique Radio ID nwnber is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this nwnber.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of this unit in the
following way.
XM:
1
While receiving a XM Radio band, press
~
or
~ to select channel "0" for XM.
2
To cancel the
10
number display, select the channel
other than "0."
SIRIUS:
1
While receiving a SIRIUS Radio band, press
~
or
~ to select channel "255" for SIRIUS.
2
To cancel the
10
number display, set the channel to
other than "255".
• You cannot use "0," "S," "I," or "F" for the ID Number (XM radio
Receiver only).
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
26-EN
Storing Channel Presets
1
Press BAND to select the desired band you want to
store.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Double Action encoder (iOA-X200 only)
or Rotary encoder (iOA-X300 only) to select the
preset number.
4
Press and hold Q.IENTER for at least 2 seconds.
The selected station is stored.
5
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedure for other bands, simply select the band desired
and repeat the procedure.
• A total of 18 channels can be stored in the preset memory for either
XM or SIRIUS. 6 Channels are stored in each band (XMI, XM2 and
XM3 for XM; SIRIUSI, SIRlUS2 and SIRlUS3 for SIRIUS).
• lfyou store a channel in a preset memory which already has a
station, the current channel
will be cleared and replaced with the
new one.
Receiving Stored Channels
1
Press BAND to select the desired band.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Double Action encoder (iOA-X200 only)
or Rotary encoder (iOA-X300 only) to select a
radio station.
4
Press Q./ENTER.
Storing the desired Sports Team (SIRIUS only)
Store a favorite team from one of the available leagues SIRIUS covers.
Once stored, game times and scores for that team are announced using
the interruption Alert display while receiving other programming. To
receive these announcements, refer to page 27.
This function becomes effective after performing the following two
operations.
1
Select the channel broadcasting your favorite team's
game.
2
Press FUNC./SETUP to activate the Function
mode.
3
Turn the Double Action encoder (iOA-X200 only)
or Rotary encoder (iDA-X300 only) to select
MEMORY, then press Q.IENTER to activate the
Memory mode.