Transceiver Unit - Furuno FS-1570 Installation Manual

1.3

Transceiver Unit

•
Bulkhead mounting only
•
Select a location which provides adequate ventilation.
•
The location must be clean and dry.
•
The mounting location must be able to support the weight of the unit (FS-1570: 11.0 kg,
FS-2570: 14.0 kg) under the continued conditions of vibration normally encountered aboard
the vessel. If necessary, reinforce the mounting location.
•
Secure the maintenance space shown in the outline drawing at the back of this manual, for
ease of maintenance and service.
Transceiver unit
Ground the transceiver unit with the cable assy (05S0479, supplied), to prevent interference.
Fasten the transceiver unit to the mounting location with six tapping screws in the order shown
below. (Asterisk-marked holes are not used.) For details, refer to outline drawings at the back of
this manual.
*
*
1
1-8
3
*
* 1
2
Transceiver unit (ex. FS-1570T)