Front View Of Transceiver Unit - Furuno FS-1562-15 Operator's Manual

1.2 Front View of Transceiver Unit

(Same for FS-1562-15 and FS-1562-25)
Loudspeaker
Microphone Volume control
Hndset Jack w/Power ON/OFF
Rotary controls
VOLUME Turns the power on and off and adjust the loudspeaker volume.
When FS-1562 is connected to DB-500 and RB-500, FS-1562 can be turned
on by RB-500.
This is possible with the RB-500 having ROM version 1.04 and after.
RF GAIN Adjusts the receiver sensitivity.
FREQ/CH Changes the frequency in conjunction with the [TX] or [RX] key. Also changes
the channel numbers set with the [RCL] key.
Keys
[1] (MODE) Selects a class of emission and controls AGC on and off. Press the [1] key
repeatedly until the wanted class of emission appears.
[2] (CURSor) Shifts cursor (underline marking). Press the [2] key to move the cursor.
[3] (CLARIFY) Adjusts the receiver frequency for fine tuning when the frequency is set in
terms of Channel NO. Not active in direct frequency entry. The adjustable
range is 150 Hz in 10 Hz steps.
[TX] Selects a TX frequency.
[4] (speaker) Turns the internal or external loudspeaker on or off. The speaker mark appears
on the display when the speaker is off.
Operation Display
SSB TRANSCEIVE FS-1562-15
R
SIMP
0 2 4 6 8 10 S
MIC VOLUME
OFF
RF GAIN
control
AGC NB
H3E
RF GAIN FREQ/CH
FREQ/CHANNEL
selector
-1.2-
Keyboard
MODE CURS CLARIFY
1 2 3 TX
SQ SCAN
4 5 6 RX
TX TUNE HI LOW
7 8 9 RCL
INTERCOM START
2182 0 ALARM ENT
STOP
TEST
S/N:
Xtal oven light
(LED)