Printer - Furuno FS-1570 Installation Manual

1.6.3 Printer PP-510
Install the unit with the two mounting fixtures (supplied). Refer to the outline drawing at the end
of this manual. Connect the interconnection cable between the printer and the transceiver unit.
For how to load paper and set ribbon cassette, refer to the Operator's Manual of the printer.
Mounting
1. Select a flat surface. (Compass safe distance: Standard, 1.0 meters, Steering, 0.8 meters).
2. Fix the printer to the mounting location with two mounting fixtures.
Mounting Fixture (1)
1-12
Thread
50
(14 threads/inch)
1" Pipe
2.6m Whip Antenna
Spring
Washer
Mast
Hose
Clamp
Earth
Coupling
Nut
Antenna Wire
Wire Antenna Fixture
Preamp Unit
Mounting of preamp unit
200
Dimensions of printer PP-510
Mounting Fixture (2)
405