Flush Mounting - Furuno FS-1570 Installation Manual

1.1.4

Flush Mounting

Use the optional flush mount kit.
Name: Flush mount kit
Type: OP05-98
Code No.: 005-951-830
Name Type
Mounting metal 05-089-1171
Wing bolt M4x30
Wing nut M4
Hex. bolt M6x12
Spring washer M6
1. Make a cutout of 251 mm (W) x 100 mm (H).
2. Insert the control unit to the cutout.
3. Attach two mounting metal (supplied with kit) to the control unit with hex bolts (M6 x 12,
supplied with kit) and spring washer (supplied with kit) from the rear side.
4. Screw four wing bolts (supplied with kit) to wing nuts (supplied).
5. Fasten the control unit to the mounting location with four wing bolts and nuts assembled at
step 3.
Cutout dimensions
1-2
Code No.
100-299-020
000-804-799
000-863-306
000-862-127
000-864-260
251+1
Flush mounting
Qty Remarks
2
4
4
2
2
Flush mounting, side view
(115)
110
(65)
23
12
25
14
100
(service space)