Using The Macro Function - Denon AVR-X7200W Owner's Manual

Contents Connections
o Using the macro function
Press the MACRO A – D button you used to store the
macro function.
o Resetting the macro function
1
Press and hold RC SETUP for more than 3 seconds.
"SETUP" and p indicator flashes twice on the remote control unit.
2
Use ui to display "RESET" on the remote control unit
and press ENTER.
3
Use ui to display "MACRO" on the remote control unit
and press ENTER.
4
When "MCNo" appears on the remote control unit,
press the MACRO A – D button that you want to reset.
"RESET" flashes four times on the remote control unit and the
normal operation mode is restored.
Front panel Display
Playback Settings
Specifying the zone used with the
remote control unit
When the ZONE SELECT button is pressed, only the set zone can be
operated with the remote control unit.
The default setting is "M23".
0
1
Press and hold RC SETUP for more than 3 seconds.
"SETUP" and p indicator flashes twice on the remote control unit.
2
Use ui to display "ZLOCK" on the remote control unit
and press ENTER.
3
Use ui to set the zone to be used and press ENTER.
"OK" flashes four times on the remote control unit and the normal
operation mode is restored.
Rear panel 284
Tips
Remote control unit
display
M MAIN ZONE only
M2 MAIN ZONE / ZONE2
M23 MAIN ZONE / ZONE2 / ZONE3
Remote Index
Appendix
Zone to be used