Denon AVR-X7200W Owner's Manual page 230

Contents Connections
n Height Layout
Select the height channel used.
This can be selected when the "Speakers for ZONE2" setting is
"FRONT WIDE/HEIGHT2" or "SURROUND BACK".
AUDIO OUT connectors
Select items
None
Front Height
(Default)
Top Front
Top Middle
Top Rear
Rear Height
Front Dolby
Surround Dolby
Front panel Display
Playback
HEIGHT1
No height channels are used.
Front Height
Top Front
Top Middle
Top Rear
Rear Height
Front Dolby
Surround Dolby
Rear panel
Settings
o Detailed settings when "Assign Mode" is set to
"7.1ch + ZONE3"
When "Assign Mode" is set to "7.1ch + ZONE3", set the following
items.
n Speakers for ZONE3
Select speaker terminals that output audio in ZONE3.
The channels of speaker terminals selected for ZONE3 cannot be
output in MAIN ZONE.
FRONT WIDE/
HEIGHT2
(Default):
HEIGHT1:
SURROUND BACK:
230 Remote
Tips Appendix
Outputs audio in ZONE3 from FRONT WIDE/
HEIGHT2 speaker terminals.
Outputs audio in ZONE3 from HEIGHT1
speaker terminals.
Outputs audio in ZONE3 from SURROUND
BACK speaker terminals.
Index