Denon AVR-X7200W Owner's Manual page 281

Contents Connections
1
Press and hold RC SETUP for more than 3 seconds.
"SETUP" and p indicator flashes twice on the remote control unit.
2
Use ui to display "MACRO" on the remote control unit
and press ENTER.
3
Use ui to display "AUTO" on the remote control unit
and press ENTER.
4
When "MCNo" appears on the remote control unit,
press the MACRO A – D button that you want to set.
5
Use ui to set the auto macro operation and press
ENTER.
"OK" flashes four times on the remote control unit and the normal
operation mode is restored.
Front panel Display
Playback Settings
Remote control
unit display
MOVIE
MUSIC
WATCH
ON
OFF
Rear panel 281
Tips
Auto MACRO
Automatically turns on the devices and starts playback
when you watch movies.
TV power ON
Blu-ray power ON
AVR Power ON
Source Change "Blu-ray"
Playback Blu-ray Disc
Automatically turns on the devices and starts playback
when you listen to music.
CD power ON
AVR Power ON
Source Change "CD"
Playback CD
Automatically turns on the devices and starts playback
when you watch TV (CBL/SAT).
TV power ON
CBL/SAT Power ON
AVR Power ON
Source Change "CBL/SAT"
Turns on all the devices set for PRESET.
All device power on
Turns off all the devices set for PRESET.
All device power off
Remote Index
Appendix