Denon AVR-X7200W Owner's Manual page 204

Contents Connections
TV Format
Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
PAL:
"Format" can also be set by the following procedure. However, the menu screen
is not displayed. Following the display content to make the setting.
1. Press and hold the main unit's o and p at the same time for at least 3
seconds.
" Video Format <NTSC>" appears on the display.
z
2. Use the main unit's o or p and set the video signal format.
3. Press the main unit's ENTER to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture
will not be displayed properly.
Front panel Display
Playback
Select NTSC output.
Select PAL output.
Rear panel
Settings
204 Remote
Tips Appendix
Index