Denon AVR-X7200W Owner's Manual page 179

Contents Connections
o Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Automatic dynamic range compression
Auto:
on/off control according to source.
Low / Medium / High: These set the compression level.
Off: Dynamic range compression is always off.
0 "Dynamic Compression" can be set when Dolby Digital, Dolby Digital Plus or
Dolby TrueHD signal is input.
0 The default setting is "Off". When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is "Auto".
Front panel Display
Playback Settings
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
n When "Input Mode" is set other than to "7.1CH IN"
-10 dB – 0 dB (Default : 0 dB)
n When "Input Mode" is set to "7.1CH IN"
0 dB / +5 dB / +10 dB / +15 dB (Default: +15 dB)
For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
Rear panel 179
Tips
Remote Index
Appendix