Denon AVR-X7200W Owner's Manual page 182

Contents Connections
o Speaker Select
Makes settings for the speakers outputting sound.
n You can set this when the sound mode is set to "DTS Neo:X".
Surround Back: Sound is output from the surround back speakers.
Height: Sound is output from the front height speakers.
Wide: Sound is output from the front wide speakers.
Sound is output from the surround back and front
Back/Height:
height speakers.
Sound is output from the surround back and front
Back/Wide:
wide speakers.
Sound is output from the front height and front wide
Height/Wide:
speakers.
This can be selected when using any of the surround back, front wide or front
height speakers.
Front panel Display
Playback Settings
n
Floor
(Default):
Floor & Height:
Front:
o Set Defaults
The "Surround Parameter" settings are returned to the default settings.
Rear panel 182
Tips
You can set this when the sound mode is original sound
mode.
Plays back without height speakers.
Plays back with height speakers.
Plays back only with speakers in front of the
surround speaker.
Remote Index
Appendix