Denon AVR-X7200W Owner's Manual page 223

Contents Connections
Setting to assign the power amplifiers in this unit for
0
connecting 2-channel playback speakers to 2 channels.
9.1ch/ You can switch the front speakers when using 2-channel
0
2ch playback in direct mode or stereo mode, or when using
Front: multi-channel surround playback. (v p. 233)
When setting speakers for 2-channel playback, also
perform the "2ch Playback" setting. (v p. 248)
Setting to assign the power amplifiers in this unit for the
0
bi-amp connection of the 2-channel playback speakers
7.1ch/
to 4 channels.
2ch
You can switch the front speakers when using 2-channel
0
Front
playback in direct mode or stereo mode, or when using
(Bi-
multi-channel surround playback.
Amp):
When setting speakers for 2-channel playback, also
perform the "2ch Playback" setting. (v p. 248)
Front panel Display
Playback Settings
7.1ch +
Front B:
Dolby
Atmos :
Pre
Amplifier:
Custom:
Rear panel 223
Tips
Setting to assign the power amplifiers within this unit
0
for connecting the second set of front speakers.
You can switch between the desired combination of
0
front speakers A and front speakers B. (v p. 234)
Switch the front speaker using the "Front Speaker"
setting. (v p. 248)
Setting to assign the power amplifiers within this unit
0
for the speaker layout suitable for Dolby Atmos
playback. (v p. 235)
All of the speakers are connected using an external
0
power amplifier and this unit is used as an integrated
amplifier.
You can connect speakers for up to 13.1 channels for
0
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 11.1 channels in accordance with the
input signal and sound mode. (v p. 236)
The internal amplifier of this unit is assigned as
0
desired.
You can connect speakers for up to 13.1 channels for
0
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 11.1 channels in accordance with the
input signal and sound mode. (v p. 238)
Remote Index
Appendix