Position Request - Uniden OCEANUS DSC Series Owner's Manual

OCEANUS DSC/ATIS_ENG_0512
4. Select the category of your call using
CH L and M (
EXIT
5. Press SELECT to transmit the ALL
SHIPS DSC signal.
When sending either an
SAFETY
automatically move to channel 70 until
all of the data is received.
6. After selecting
ALL SHIPS call is transmitted, the radio
will switch to Channel 16. You should
wait a few minutes before transmitting
the ALL SHIPS call information.
1-D. POSITION REQUEST
This radio has the ability to request the position of an individual vessel
that is registered in the DIRECTORY.
1. Press SELECT at
DSC CALL
INDIVIDUAL
2. Display
and CH M.
5/12/05 10:34 AM
URGENCY , SAFETY
).
URGENCY
message, all radios will
or
URGENCY
DSC CALL
, see page 18).
appears.
using CH L
POS REQUEST
Page 21
,
or
SAFETY
(To enter
21