Position Request - Uniden Oceanus DSC Series Owner's Manual

UT01910ZZ_0 9/18/03
4. Select the category of your call using
CH ▲ and ▼ (
ROUTINE
ROUTINE
Note:
previously selected channel.
5. Press SELECT to transmit the ALL
SHIPS DSC signal.
When sending either an
SAFETY
automatically move to channel 70 until
all of the data is received.
6. After selecting
ALL SHIPS call is transmitted, the radio
will switch to Channel 16. You should
wait a few minutes before transmitting
the ALL SHIPS call information.
1-D. POSITION REQUEST
This radio has the ability to request the position of an individual vessel
that is registered in the DIRECTORY.
1. Press SELECT at
DSC CALL
INDIVIDUAL
Press CH ▼ three times to select
2.
POS REQUEST
5:37 PM Page 24
URGENCY SAFETY
,
).
calls tune to the
URGENCY
message, all radios will
URGENCY SAFETY
or
DSC CALL
, see page 21).
appears.
.
24
,
or
(To enter