Atis Id - Uniden OCEANUS DSC Series Owner's Manual

OCEANUS DSC/ATIS_ENG_0512
5. After the final digit is entered, press and
hold SELECT. The radio returns to
USER MMSI
Note: You can only program your radio
once with an MMSI number. After
that, send your radio to Uniden
Dealer for factory service.
2-J. ATIS ID
ATIS is the automatic transmitter identification system. The ATIS ID is
composed by number of 10 digits, and it is already registered to your
radio. The first digit is pre-selected to "9", but it doesn't appear on the
display. From 2nd to last digits are displayed.
To confirm the ATIS ID
1. Press SELECT knob at
Press CH M nine times to select
2.
ID .
3. Press SELECT. The ATIS ID number
appears.
5/12/05 10:34 AM
screen.
SETUP .
ATIS
43
Page 43