Uniden OCEANUS DSC Series Owner's Manual page 8

OCEANUS DSC/ATIS_ENG_0512
1. TX (Transmit) - Indicates transmitting.
2. HI (High) - Indicates transmit output is 25 Watts.
3. DSC - Indicators the radio is in the DSC mode.
4. TRI (Triple Watch) - Indicates Triple Watch Mode is in effect.
5. MEM (Memory) - Indicates Memory Scan Mode status for each
channel selected.
6. LO (Low) - Indicates transmit output is 1 Watt.
7. WX - It blinks when the radio in the Inland Waterway mode.
8. (GPS Icon) - It appears while GPS module is receiving the
data.
9. (Alarm Icon) - It appears when the alarm clock is set.
10. CH TAG - This area is used for Channel Tag, Menu, and message
of DSC, GPS. These messages will continually scroll from right to
the left.
11. Channel Display - Indicates Channel Number in use.
5/12/05 10:34 AM
6
Page 6