Nmea Technical Setup; Optional Accessories - Uniden OCEANUS DSC Series Owner's Manual

OCEANUS DSC/ATIS_ENG_0512
OCEANUS NMEA0183 GPS Input Connection
Specification
This section is useful when attaching an external GPS to the OCEANUS
DSC/ATIS radio. Many GPS units have a setup menu to be able to
configure the NMEA0183 serial data output. This output can be used to
supply information to other devices on the vessel, such as the
OCEANUS DSC/ATIS VHF radio, auto pilots, chart plotters, etc.
To setup the GPS to be used with the OCEANUS DSC/ATIS radio, the
following items need to be considered for proper operation:
1. Baud Rate – Set the Baud rate to 4800.
2. Data Bits – Set the Data Bits to 8.
3. Parity – Set the Parity to None.
4. Stop Bits – Set the Stop Bits to 1.
5. GPRMC Command – This command is used by the OCEANUS
DSC/ATIS and includes the UTC Time, Latitude, Longitude,
Speed, Direction, and Date information.
The data amplitude : Over 3.0V
Drive capability
• Flush mounting bracket for "in dash" installation.
(Black = FMB322B)
• Speaker/Microphone (HHVAT07).
Contact your Dealer for information.
5/12/05 10:34 AM

NMEA Technical Setup

: Over 10mA

Optional Accessories

48
Page 48